Guide · Heat and sun control

Heat-blocking window film: how to choose

Updated · TintSEE

01Where the heat comes from

Sunlight carries visible light, ultraviolet and infrared energy. Infrared is what you feel as warmth. Standard glass lets most of it through, and the room absorbs it. Heat-control film is built to reflect or absorb a large share of that energy while still letting visible light pass.

02Read the numbers on the spec sheet

Three figures matter most. Visible light transmission (VLT) shows how much light gets through. Total solar energy rejected (TSER) shows how much of the sun's overall energy the film blocks. UV rejection shows how much ultraviolet it stops. A film with high TSER and a comfortable VLT keeps a room bright and cooler. Compare films on the manufacturer's published data, not on the marketing name.

03Match the film to the window

Sun exposure depends on which way the window faces. In most NYC row houses, the east and west walls are shared with neighbors, so the windows face north or south. Sun from the south arrives across the day and for most of the year, so it adds the most total heat. West windows get the afternoon sun, which is low and direct and arrives when outdoor air is warmest, so they often feel hottest. East windows get early-morning sun, which warms the room first but is usually milder than the afternoon. North-facing windows get little direct sun.

04Find which way your window faces

On an east-west street, a front and its back face opposite ways. An odd-numbered building is usually on the north side of the street, so its front faces south. An even-numbered building faces north. A compass confirms it.

If the building is landmarked, LPC looks most closely at the front, so check before you film it. The back still needs review, but it is often the simpler side.

05Clear ceramic compared with tinted and metallic films

Ceramic films aim to block heat without much color or mirror effect, which suits homes where you want to keep the view. Darker and metallic films can block more heat, but they change how the window looks from outside and reduce light more. Metallic films can also interfere with wireless signals, which matters in some homes.

06Double-pane and low-E windows need the right film

Film on the glass makes the pane run hotter in the sun. On some insulated (double-pane) units that extra heat can stress the glass or the seal, so manufacturers publish film-to-glass charts listing which films are approved on which glass. 3M, for example, requires a glass checklist before installing on double-pane glass over 40 square feet.

Tell the installer if your windows are double-pane, low-E or very large, and ask which film is approved for that glass. Warranties for glass breakage and seal failure typically cover only approved combinations.

07What to expect

Film reduces the heat that passes through the glass. It doesn't fix drafts or a poorly insulated window, so it works best alongside shades, insulation and air sealing. Your installer should measure each window and recommend a film for its exposure.

Sources

Bright living room with afternoon sunlight coming through the windows, showing solar heat gain through glass
Illustrative image: Afternoon light pours into a living room, showing how sun through glass adds heat.

Read the spec sheet

VLT
Visible light transmission

How much light gets through. A comfortable VLT keeps the room bright.

TSER
Total solar energy rejected

How much of the sun's overall energy the film blocks. Compare this, not the darkness.

UV
UV rejection

How much ultraviolet the film stops.